During the pandemic shutdown, Jonathan Lee, structural materials engineer at NASA's Marshall Space Flight Center in Huntsville, Alabama, got to thinking about disc brakes. His skills as a mechanical designer backed with material science training are usually focused on his dual roles as the structural materials engineer for the Space Launch System and a microgravity material scientist for the space station. Interested in supporting NASA's other mission to advance technology to improve life on Earth, he was looking for an innovative way to design a better automobile disc brake.
"NASA's willingness to help companies be more successful, using all of their expertise and the goodwill that extends, is really amazing," said Chance Claxton, co-CEO of Santa Rosa, California-based Orbis Brakes.
He started with a single disc with a series of small fins around the central hub. As they spin, these draw in air and push it across the surface of the disc, where the brake pads make contact, cooling the rotor, as well as the brake pads and calipers. He then added several long depressions around the braking surfaces, radiating from the center to create the regular, periodic pattern that gives the new Orbis technology its PeriodicWave brand name.
The spinning fins and the centrifugal force of the wheel push air into the depressions, causing a turbulent airflow that draws away heat. "When the air flings out, it goes across the brake caliper and cools it - no conventional rotor is capable of doing something crazy like that. It's huge," said Lee.
These trenches in the braking surfaces also increase the available surface for air cooling by more than 30% and further reduce the weight of the disc. And they increase friction in the same way that scoring concrete makes steps safer to walk on - the brake pads are less likely to slip, which makes braking more reliable.
The troughs draw away more than just heat, too. Water and road debris getting between the pad and rotor are equally problematic, so the trenches provide a place for the air vortex to push any substance out of the way. A small hole machined at the end of each one creates an opening through which unwanted material can escape. "And it also just looks cool," said Lee.
A second periodic wave is cut along the outer edge of the disc. By replacing the conventional circular design with an undulating pattern, the new rotor has still more surface area that will come into contact with the cool air flowing over it. This additional heat dissipation will occur no matter which periodic wave pattern is used, making it possible to create funky designs and add personality to what is usually a boring car part.
Finally, a thin layer of black coating applied to surfaces that don't come into contact with the brake pads, like the inside of the troughs, can help the rotor to radiate additional heat. This unique three-part cooling system - convection powered by airflow, conduction of heat across the metal rotor, and radiation from dark-coated surfaces - has never been implemented effectively on any conventional disc brake rotor before, Lee said.
"When brake pads exceed a certain critical temperature, depending on their materials, they can emit a 10,000-fold increase in toxic nanoparticulates," said Marcus Hays, co-CEO of Orbis Brakes. Because the toxic dust hovers right at street height, the impact on human health is more harmful than exhaust emissions, according to an Oxford University study. So the company is currently testing its EcoWave brake design to ensure it will not create that kind of emission, according to Hays.
In the meantime, Orbis is offering the NextWave rotor as an after-market disc brake for high-performance cars like the Ford Mustang and some Tesla models.
Electric cars can be about 25% heavier than internal combustion-engine vehicles, and they have excellent speed, acceleration, and torque. Owners tend to drive them like sports cars, according to Hays, so the company is offering an alternative to the factory-installed brakes, which aren't designed for that kind of handling. NextWave will enable faster stops and better direction changes, in addition to a different kind of cool factor: "This extraordinary functional configuration also has an incredibly novel appearance - there's nothing like it in the history of disc brakes," said Claxton.
All of these models weigh approximately half what conventional rotors weigh, while drastically improving the braking performance. All the brakes will be manufactured in the United States. In addition to the potential for reduction of toxic nanoparticles, the carbon footprint for every type of periodic wave disc brake will be much smaller than conventional brakes.
Calling NASA's Technology Transfer program "instrumental to American competitiveness," Hays described the company's relationship with NASA as "mind-blowingly powerful."
"It is absolutely going to catapult our business and gives us a credibility and validity for everything we do," he said. "NASA gives us a foundation to go out into the world and negotiate and have the respect of our peers right out of the gate. That would not be the usual case for an early-stage company."
Related Links
NASA Spinoff
Car Technology at SpaceMart.com
| Subscribe Free To Our Daily Newsletters |
| Subscribe Free To Our Daily Newsletters |
